Refine Results

Resource Type

  • Design Guides
  • Code Approvals
  • White Papers
  • Installation Instructions
  • Webinars
  • Technical Blogs

Product Category

  • Structural Fasteners
  • Beam Hangers
  • Connectors Devices
  • Rigging Devices
  • Anchor Devices
  • Accessories


  • Solutions Overview
  • Mass Timber Connection Design
  • Regulations & Safety
  • Test Results
  • Installation Recommendations
  • Service Conditions
  • Wind & Seismic Design
  • Fire Performance Design
  • Wood Fiber Reinforcement
  • Timber Concrete Composite System
  • USA
  • Canada
  • Europe
White Paper

White Papers

Standard Bay Fire Design

The evolution of building codes in the US and other jurisdictions worldwide, demonstrated by the 2021 release of the International Building Code (IBC-21), reflects an obvious ...

White Papers

Supplementary Considerations for the Conventional Yield Model

Johansen’s yield model—a widely adopted design model for determining reference lateral design values for wood member connections in heavy timber and mass timber ...

White Papers

Interstory Drift Stiffness of MEGANT E Connector

This White Paper is a supplement to a previously published White Paper, by referencing both monotonic and cyclic testing data obtained from Oregon State University (OSU) to ...

White Papers

Screw Buckling Values for Compression Perpendicular to Grain Reinforcement

This white paper addresses the challenges faced by engineers and designers in North American mass timber design in selecting efficient members, particularly in relation to ...

White Papers

Withdrawal Resistances of ASSY Screws at Various Angles to the Grain

Discover the secret to accurately calculating withdrawal resistance in mass timber connections with MTC’s ASSY self-tapping screws (STS). Our comprehensive technical ...

White Papers

Mass Timber Connections Beam Hanger Selection Charts

This document offers project managers, designers, and purchasers easy-to-read tables to efficiently select and substitute the most cost-efficient beam hanger system between ...

White Papers

Interstory Drift Performance of MEGANT E Connector

The significance of the response of mass timber connections to loading conditions such as seismic or high wind events grows over time with the increase in maximum height now ...

White Papers

Stiffness Considerations for Custom Bearing Beam Hangers

This white paper explores the role of stiffness in designing a custom bearing beam hanger system for mass timber buildings and emphasizes on the importance of testing and ...

White Papers

Steel to CLT Lateral Connections

This white paper reviews the results of recent lateral load testing of Assy screws used to fasten steel plates to CLT.

White Papers

Screw Withdrawal Resistance in Near-Edge Applications

This white paper discusses application of long self-tapping screws (STS) in near-edge applications.

White Papers

Substitution of Lag Screws with Wood Screws

This Special Design Provision suggests adequate self-tapping screw replacements for given lag screw geometry that meet or exceed load-carrying capacities calculated for single ...

White Papers

CLT Special Provisions

This CLT Special Provisions contains reference design values derived from testing. With it, designers can increase cost efficiency for large projects.

1 2 3

Sign Up

Register for a Technical Learning Session


Sign up for MTC Newsletter and keep up to date with all our progress.