Product Description
Clip Lock brace systems are additional components available for the RICON S VS beam hanger system. The Clip Lock is a special thin steel plate designed to fit into and lock the RICON S VS beam hanger plates together, yielding a resistance to uplift forces. The Clip Lock is installed with the hanger on the primary beam or column, and as the secondary beam is lowered into place, providing resistance to uplift loads. These components are installed using the same screws used to fasten the beam hanger plates into the wood member. A new screw pattern applies to the primary member to allow the Clip Lock to be installed properly, which results in a reduced download capacity. For uplift capacities and installation instructions, refer to the Beam Hanger Design Guide.
Design Guides
The Beam Hanger Design Guide is a practical resource for designing mass timber beam connections. It provides off-the-shelf, pre-engineered solutions such as the APEX and RIDGE, featuring tabulated design values and complete installation instructions to support project completion.
Technical Blogs
Provide your contact information and the quantity and size you would like, and our Product Consultants will contact you with a quote for your requirements.
Provide your contact information , our Engineers will get back to you within 48hrs.
Register for a Technical Learning Session
Sign up for MTC Newsletter and keep up to date with all our progress.
Product Description 
R
T
