Resources

filters

Refine Results

Resource Type

  • Design Guides
  • Code Approvals
  • White Papers
  • Installation Instructions
  • Webinars
  • Technical Blogs

Product Category

  • Structural Fasteners
  • Beam Hangers
  • Connectors Devices
  • Rigging Devices
  • Anchor Devices
  • Accessories

Topic

  • Solutions Overview
  • Mass Timber Connection Design
  • Regulations & Safety
  • Test Results
  • Installation Recommendations
  • Service Conditions
  • Wind & Seismic Design
  • Fire Performance Design
  • Wood Fiber Reinforcement
  • Timber Concrete Composite System
  • USA
  • Canada
  • Europe
White Paper

White Paper

Timber Moisture Content Changes and Associated Stress Predictions on Structural Wood Screws

Special detailing considerations regarding moisture induced dimensional changes in wood and potential solutions using modern self-tapping screws.

White Paper

Inter-Story Drift Performance of Concealed Connection Systems

The Inter-story drift performance of concealed pre-engineered connection systems under quasi statically reverse cyclic load is presented in this paper.

White Paper

High Performance Beam to Post Connections

Overview of innovative method of arranging two high capacity KNAPP RICON® S connectors for slender beams.

White Paper

Testing Concealed Double Connections

Summary of the on-going testing on beam to beam connections using Ricon connectors. Provides background, update and preliminary results on this exciting topic.

White Paper

Overview of Dynamic Testing Campaign on CLT Connections

Summary of on-going testing on CLT Connections under Dynamic loading. Provides the background, progress and initial observations on an exciting research topic.

White Paper

Testing of Screws in End-Grain

This white paper summarizes the on-going testing campaign being performed on the pull-out resistance of Assy screws when applied in end-grain.

White Paper

Designing Timber Concrete Composite Systems (TCC) with ASSY Self-Tapping Screws

Guide to help the designer better understand the mechanical behaviour that governs timber concrete composite systems using wood screws as shear connectors.

White Paper

Timber Concrete Composite Systems (TCC) Design Example

Design values for Timber Concrete Composite Systems with inter-layer and a design example for a TCC-Tbeam are presented.

White Paper

RICON S VS Design Examples

Step by step design examples of a KNAPP connector with a design procedure considering the joint configuration with and without radial tension reinforcement.

White Paper

GIGANT Pre-engineered Connector Design Example

Step-by-step design example of a GIGANT connector with a breakdown of the procedures considering the joint configuration without radial tension reinforcement.

White Paper

CLT Horizontal Diaphragm Design Example

Practical design method to determine the strength and stiffness of a Cross Laminated Timber (CLT) horizontal diaphragm under lateral wind or seismic loads.

White Paper

Purlin to Beam Connections Using ASSY Fully Threaded Fasteners

Roof purlin to beam connections may, most efficiently, be designed with fully or partially threaded structural wood screws. Structural wood screws provide the required ...

1 2 3

Sign Up

Register for a Technical Learning Session

NEWS LETTER

Sign up for MTC Newsletter and keep up to date with all our progress.