Resources

filters

Refine Results

Resource Type

  • Design Guides
  • Code Approvals
  • White Papers
  • Installation Instructions
  • Webinars
  • Technical Blogs

Product Category

  • Structural Fasteners
  • Beam Hangers
  • Connectors Devices
  • Rigging Devices
  • Anchor Devices
  • Accessories

Topic

  • Solutions Overview
  • Mass Timber Connection Design
  • Regulations & Safety
  • Test Results
  • Installation Recommendations
  • Service Conditions
  • Wind & Seismic Design
  • Fire Performance Design
  • Wood Fiber Reinforcement
  • Timber Concrete Composite System
  • USA
  • Canada
  • Europe
White Papers

White Papers

Stiffness Considerations for Custom Bearing Beam Hangers

This white paper explores the role of stiffness in designing a custom bearing beam hanger system for mass timber buildings and emphasizes on the importance of testing and ...

White Papers

Fire Design for Mass Timber Connections

Design provisions for fire design of mass timber connection systems in North America compared against the results derived from full-scale testing.

White Papers

Overview of Dynamic Testing Campaign on CLT Connections

Summary of on-going testing on CLT Connections under Dynamic loading. Provides the background, progress and initial observations on an exciting research topic.

White Papers

High Performance Beam to Post Connections

Overview of innovative method of arranging two high capacity KNAPP RICON® S connectors for slender beams.

White Papers

Testing of Screws in End-Grain

This white paper summarizes the on-going testing campaign being performed on the pull-out resistance of Assy screws when applied in end-grain.

White Papers

RICON S VS Design Examples

Step by step design examples of a KNAPP connector with a design procedure considering the joint configuration with and without radial tension reinforcement.

White Papers

Timber Moisture Content Changes and Associated Stress Predictions on Structural Wood Screws

Special detailing considerations regarding moisture induced dimensional changes in wood and potential solutions using modern self-tapping screws.

White Papers

CLT Horizontal Diaphragm Design Example

Practical design method to determine the strength and stiffness of a Cross Laminated Timber (CLT) horizontal diaphragm under lateral wind or seismic loads.

White Papers

GIGANT Pre-engineered Connector Design Example

Step-by-step design example of a GIGANT connector with a breakdown of the procedures considering the joint configuration without radial tension reinforcement.

White Papers

Steel to CLT Lateral Connections

This white paper reviews the results of recent lateral load testing of Assy screws used to fasten steel plates to CLT.

White Papers

Timber Reinforcement Guide

A variety of typical reinforced timber details such as notches, openings/penetrations, bearing under compression and perpendicular connections.

White Papers

Designing Timber Concrete Composite Systems (TCC) with ASSY Self-Tapping Screws

Guide to help the designer better understand the mechanical behaviour that governs timber concrete composite systems using wood screws as shear connectors.

1 2 3

Sign Up

Register for a Technical Learning Session

NEWS LETTER

Sign up for MTC Newsletter and keep up to date with all our progress.